Fastening Instructions
Plate and Support Mounted Legs

- Work on the bottom side of the furniture.
- Align the leg plate to the corner of the frame.
- Mark the holes with a pencil and drill a pilot hole if necessary.
- Insert #8 or #10 x 1 1/2" long wood screws.
Bolt Mounted Legs

- Work on the bottom side of the furniture.
- Drill ½” hole into the frame of furniture centered to the size of the leg.
- Align the center hole of the bolt plate to the hole you drilled in the frame.
- Attach bolt plate with screws provided.
- Place leg over bolt plate and thru the bottom of leg use a screwdriver to tighten bolt to bolt plate. (Ball and Cone legs just need to be turned by hand)
- Insert plastic glide.
Box and Cube Legs

- Work on bottom side of the furniture.
- Place leg on frame.
- Insert screws through bottom hole.
Holden Legs

- Work on bottom of furniture.
- Place Support on furniture, line up Bottom Leg to support. Large Holes facing up.
- Insert screws through both parts. Fasten.
- Insert Plastic Glides.